Cipherlabs 8200 PDE Unit Setup Instructions



Plug USB/Communication cable into base of the communications/charging cradleDo not plug USB cable into computer at this point

Insert power connection into communications/charging cradle

Plug power pack into power and turn switch on

Place 8200 PDE unit into the communications/charging cradle.

Allow unit to charge. (Unit has been charged at Computerlink)

Remove 8200 PDE unit from communications/charging Cradle

Turn Cipherlab 8200 PDE unit on button on right hand side at the bottom

Select 1 Collect Data  then press enter (blue button)

Scan an object with a barcode (yellow button)

Leave quantity as 1 and press enter

Press the ESC button to return to the main menu

Open notepad on your PC (start, programs, accessories, notepad)

Place the PDE unit back in to the communications/charging cradle.

Plug the USB cable into the computer now

Press 2 on the keypad of the 8200 PDE Unit to upload Data

Device will now search for and install drivers

Give it a little moment and the barcode and the quantity item that you scanned should appear in the notepad window

On the PDE unit keypad select option 1 and enter to delete.

Unit will return to the main menu.

Close Notepad on your computer.

Your Unit is now ready for use

Please refer to Performing a Stocktake for instructions on using the 8200 PDE unit with Computerlink